Mobile power should be on hand when you need it. It shouldn’t be a maybe, whether you need pure sine wave power, 110 volts or 220 volts, our line of generators will get you the power you need to get the job done quickly and without hassle. Simply flip a switch to turn your truck into a mobile workshop with industrial-strength power.
Vanair Air n Arc All in One
When you need it all: a generator, air compressor, welder, battery boost, hydraulic pump and battery charger, contact Drake-Scruggs about the Vanair Air N Arc All in One generator. Instead of having several pieces of equipment taking up a lot of space on your truck, choose one box that does it all. Whether you are on a job site or on the road, and in any weather, the Vanair Air n Arc All in One power supply allows you to use up to six functions.
The All in One mode mounts to the truck’s service body or its side pack so that you can create a mobile workshop without using too much space. The remote access panel allows you to switch between tasks, so you don’t have to jump in the bed of your truck to change from the welder to the jackhammer.
This model also allows you to save fuel, as it is lighter than carrying several different pieces of equipment for the power that you need. And, if you have to rotate between which equipment is on your truck, you’ll never have to worry about needing something that you had to leave at the shop due to space restrictions.
Power it All
The All in One integrates with your truck for gas or diesel, or you can choose to use an independent fuel tank. It will run and charge all of your power tools from a remote control panel. Run welders, air-powered tools, cranes and computers.
The All in One generator allows you to operate simultaneous tools so that you can finish a job in half the time. The power is never interrupted, even when you put high demands on the generator. Put the remote panel where you need it so that it’s easy to change between different applications, instead of running back and forth to the truck.
The Air N Arc I-300 allows you to run on gas or diesel. It provides 40 CFM, 7kW, 300 amps, a 12-volt charge, 12-volt to 24-volt boost, and 13 GPM power. It will run up to a 1-inch impact wrench, lights, grinders, blow nozzles, welders, saws and more. It will also charge the battery packs for your battery-powered hand tools. Choose from a 14-horsepower or a 19-horsepower Kohler engine.
When you are looking for the best power source for your mobile workshop, contact Drake-Scruggs for more information about any of the generators we offer.